Common Speed Queen Washer Problems And How To Fix It


Speed Queen is a well-known brand of commercial and household washing machines. Even if you have a series of problems with your Speed Queen washing machine, you don’t have to worry because there are solutions for every problem that occurs. In this article, we’ll see what these common problems can be and how to fix them.

Common Speed Queen Washer Problems and Solutions

Here’s a List of 6 Common Issues and Solutions in Speed Queen Washer!

Speed Queen Washer Not Draining

Drain pump failure: During the spin cycle of the washing machine, water is pumped out of the drum through the hose and into the drain. If the bearings in the pump are worn, there will be no discharge. This indicates that the part needs to be replaced. However, keep in mind that the drain pump is a non-serviceable part. If the leak is due to a faulty drain pump, it must be replaced.

Clogged Drainage System: This happens to all of us – we accidentally drop a sock or towel into the washing machine, causing the washing machine to stop, preventing water from flowing into the house. But don’t worry, this problem is easy to fix. Simply remove the drain hose from the pump and check for blockages. If you find one, you can easily delete it yourself.

Kinked Drain Hose: A kinked, twisted, or bent washer drain hose is not good and can cause the washer to drain poorly. If you notice a bend or kink in the hose, you can straighten it.

Speed Queen Washer Stops Mid Cycle

If this happens to you, don’t panic. You may encounter common problems with Speed Queen washing machines.

Door not locked: If not locked properly, the door lock will prevent the washing machine from starting to work. The washer door switch stops the washer if the door is open during cycle operation and can resume when the lid is closed.

Malfunctioning water inlet valve: If the water inlet valve on your washing machine fails, it can cause the tub to slowly fill with water, or even stop in the middle of the wash cycle. Replacing this simple part and making sure it seals properly will restore the normal function of the gasket and eliminate the worry of damaged parts.

Timer failure: A timer failure is the most common reason a washing machine stops mid-cycle. Any interruption of the current flow can be caused by a malfunction of the timer, which is responsible for connecting the circuit and making it complete. To check if this is the case, remove the machine and test its timer for continuity with a multimeter. If there is any problem, please replace it with new parts.

Speed Queen Washer Won’t Start

Speed Queen Washer

If you have a problem with your Speed Queen washer, the following instructions will help you troubleshoot and get your washer back up and running.

Lid failure: Keep the lid closed when the washer or dryer is not in use. If the cover is open, your machine will not start and damage may occur. Do not use an extension cord or adapter to operate the washer or dryer.

Motor overload protector: Your washing machine seems to smell of electricity burning. If it hasn’t already, you should turn off the household circuit breaker and time out two to three minutes after the washing machine seems to stop. Restart the circuit breaker and try cleaning again.

Lid switch problems: When the washer doesn’t turn on, the first thing to check is the lid switch. If the cover switch is locked, it will not open. You can also check if the light is on. If your washing machine is still having problems and does not respond to the above operations, please check that the main switch is normal. Replace if damaged or burned out.

Speed Queen Washer Not Spinning

Here are some helpful tips you can use to troubleshoot when your Speed ​​Queen washer isn’t spinning. Try these methods one by one; if you find that they do not solve the problem, then you need to contact a professional.

Lid open: Checking the wiring harness that connects to the dishwasher and detecting when the lid is open (or closed) can help you determine if this is the source of the problem. To do this, turn off the circuit breaker to the dishwasher and disconnect the two wires connected to the lid switch assembly. Next, use a multimeter to check for continuity between these two wires when the cover is open and closed.

Check the drive belt: When the washing machine drive belt is damaged, the machine will not work properly and the clothes cannot be washed. If no problem is found, check for a broken or loose drive belt on the pulley. Whenever you find that your new washer has a broken drive belt, replace it with a new one as soon as possible. The best spare parts are made of high-quality materials and will last for years.

Defective motor control board: When you hit the “start” button on the washer, you expect it to work. But if the motor control board is not working properly, the washing machine will not spin. Check for a burnt part: if it’s applying power to the motor, it’s time to replace it.

Speed Queen Washer Not Filling With Water

If your Speed ​​Queen washer is not filling enough water, double-check the detergent tray first. Make sure you have enough detergent and fabric softener in it. If this is not the problem, also check the drain hose. It may clog or kink.

Clogged hoses or filters: Don’t ignore kinked or wrinkled hoses – they can cause problems in your laundry room, including a Speed ​​Queen washer that won’t refill. Check to make sure the hose has not been cut or ruptured, and repair it if you see any signs of damage. If you have a problem with your Speed ​​Queen washing machine, there are a few things to check before calling for service. Start by checking the hose or filter for debris or kinks that are blocking the flow of water. Then, turn on the hot and cold water faucets and observe whether there is an accumulation of water in the fill hose.

The washer lid is not closed: When closing the washer door, make sure the lid is fully closed. If not, you’ll see a small amount of water standing in the washer, and if a leak occurs, your warranty will be void. Washing machines have an inlet valve that helps regulate the water supply to the machine; if damaged or broken, it can cause an overflow and even flood the house.

Low water pressure: If your water pressure is low, the valve may not open for the washer to fill. To ensure proper operation of the water inlet valve, ensure that the water pressure at the water fittings of the unit is at least 20 pounds per square inch (PSI).

Speed Queen Washer Leaking

A leaking Speed Queen washer is a common problem. While Speed Queen is a great brand, the washing machine does break down. This blog discusses the steps to repair a damaged Speed Queen washer.

Drain pump problems: If your washer starts leaking from the floor or under the machine, it may be because the pump inside the washer is faulty, cracked, or damaged. This will allow the water to flow out when the machine is turned off. The location of this part varies by model. If the bearing of the pump is worn, the gasket will leak. The pump is not serviceable. So, you need to replace it.

Torn barrel seal: If the inner barrel seal is torn or damaged, water can leak into the bearing and cause failure. To prevent this problem, and also save money, replace the inner tube seal with a new one to save time and money.

Broken door seal: If the washer door shoe is broken, it may be time to replace it. These boots help maintain the seal between the door and the drum and prevent leaks. If your machine is still under warranty, be sure to contact the manufacturer before replacing the dust jacket.

OK, here are 6 common problems that pop up frequently in Speed Queen washing machines. So, if you encounter one of the common problems mentioned above, make sure to fix it as soon as possible.


Since we read the guide in detail and tried to understand the different issues related to the speed queen washing machine not working, we are happy to help you in this difficult time.

These problems keep happening, but if you make an effort to focus, the problems are easily resolved in a short period of time.

You may also like...