How To Connect Firestick Remote To TV Volume? 5 Ways


Amazon Firesticks are one of the most popular streaming devices today due to their diverse app support while being affordable. Upon purchasing a Firestick device, you’ll be given a custom remote.

The Fire TV remote app can be used to control the volume on your Fire TV device, but there are a few steps you must take to configure your Fire TV device to hear and respond to the volume control commands sent from the remote app. However, how to connect Firestick remote to TV volume?

One method is to enter the Firestick’s Settings by holding down the home button on the remote control. then select TV from the menu under Equipment Control. Push the Power button on the remote after choosing the brand, wait 10 seconds, then turn on the device to make sure it worked. You can connect your Firestick remote to your TV’s volume in a few different ways, which we’ve listed below.

How To Connect Firestick Remote To TV Volume?

1. Use Your Phone

You don’t have to miss your favorite show just because you’re out of the house! To complete these steps, use your smartphone.

  1. Install and launch FireStick Remote for iOS or Android on your device.
  2. Using your Amazon username and password, tap the app button at the bottom of the screen to link it to your Amazon account.
  3. Using this app, you can now adjust the television’s volume! This app also lets you switch between different video sources and channels.

2. Use A Bluetooth Speaker

A Bluetooth speaker can be used to link your Firestick remote control to the TV’s volume. Put the speaker close to the TV, connect it to your device, and you’re ready to go! Some Bluetooth speakers even come with their own dedicated app for managing playback or instructing your media player verbally.

Any other speaker or audio device with a headphone jack on one end and an aux-in jack on the back of your television can also be used.

Bluetooth Speaker

3. Use Another Firetv/stick Remote

The good news is that if you already own a remote for your Amazon FireTV or Stick, you can use it without a pairing code on your device. The fact that some universal remotes and third-party remotes are incompatible with this is an important point to note. Additionally, since the volume controls aren’t always mapped in the same way, you might need to switch back and forth between the two remotes. Use Alexa: We are aware of your love for your virtual assistant! Turning up/down the volume is now a command you can make to Alexa to adjust your volume.

4. Use An Alexa Device

Start by joining the same wifi network as your Echo, Echo Dot, or Echo Show before you can use your Alexa device. Then command Alexa to find my devices.

Then, using the left and right buttons on your Alexa device remote control, locate the device you’re looking for. You’ll see all the devices connected to your network. When you click Pair after locating the right device, you should be connected.

Read more: How To Connect Amazon Firestick To WiFi?

5. Use An Hdmi Switch

The cheapest and most straightforward way to solve your volume problems is with an HDMI switch. They typically cost around Rs. if you don’t already have one. 1000.

You connect the HDMI cable from your streaming device to the switch’s input, then connect your TV’s cables to the outputs as usual. The great thing about this is that it saves time and makes wiring much easier!

Do You Have To Buy A New Firestick To Get A Replacement Remote?

If a remote break or gets lost, one worry people might have is whether they can replace it without purchasing a new Firestick. Good news! You can purchase a replacement remote for your gadget. Simply check that the remote you purchase is appropriate for the specific Firestick model you are using. If not, you might experience problems getting the remote to function at all.

Can You Pair A Third-party Remote With Your Firestick?

A third-party remote can refer to a variety of devices, such as a universal remote control, a remote for another service (such as Roku), or even a remote made specifically for the Firestick. Regrettably, remotes designed for gadgets like Roku won’t be able to control Firesticks and vice versa.

In order to use a universal remote, you must confirm that it is Bluetooth enabled and has a connection port for the Firestick. By looking up the remote’s model number, you can determine whether or not it can perform that function. If you’re not sure where to look, it should be in the user guide or on the remote control.

If the logo isn’t there, you can look around the area directly surrounding it as well as all other potential hiding places, such as the battery compartment. Utilizing a tool like Google Lens would be an additional choice. This tool allows you to take a picture and compare it to other pictures online, which might help you identify which remote it is.

Final Words

Several different methods exist for connecting your Firestick remote to your TV’s volume. The Firestick volume can be controlled if your TV supports HDMI-CEC, even if you don’t have the original remote for your TV.

This guide should make it easier for you to use your Firestick’s remote to adjust the brightness and volume of your TV.

Read Next:

You may also like...