Is the Ring Doorbell waterproof? The doorbell is not waterproof but it can withstand temperatures between -5 and 120°F and is water resistant. It is built to withstand water for safety, but it is also incapable of functioning when submerged in water.
In reality, a number of layers of coating with water-repellent properties provide water resistance. But you should also pay attention to Ring Doorbell in extreme weather.
Even in heavy rains, there are techniques to keep your doorbell operational. To learn all the ways, read the article below.
Table of Contents
Can A Ring Doorbell Get Wet?
The doorbell is not waterproof. It is not recommended for use in areas that frequently flood even though it is made to withstand average rainfall. In order to prevent potential damage, make sure that the doorbell is completely dry after getting wet. A doorbell might not be appropriate for your home, for instance, if you reside in an area that receives a lot of rain each day.
Ring doorbells are exposed to direct sunlight as well, so they shouldn’t be placed there or in an area with a lot of UV rays. Its performance may gradually decline as a result, and it may also harm any other USB-connected devices as well as the device itself. Even though it is weather-resistant enough to handle light from all angles, installing it anywhere other than directly outside will reduce its efficiency.
What Does The Term “Waterproof” Mean?
Anything that is impervious to water is considered to be waterproof. Technically speaking, however, no object is completely waterproof. Manufacturers assert that their products are impenetrable and waterproof, though.
However, knowing the precise functional scale that indicates the amount of water that a product can withstand can help you decide what to choose and what to avoid!
This rating system is known as the IP code for ingress protection. Only electronic and mechanical casings are eligible for this scale’s rating.
All waterproof gadgets are assigned an IP code, which specifies the amount of water that a product can withstand. The first two digits of the code is “IP” and the third letter is X, which stands for resistance to solid objects. The device’s capacity to withstand fluids is indicated by the last digit, which can range from 0 to 9.
Why Is Water-proofing Important?
The waterproofing of the doorbell makes a lot of sense, so that is a good question. This is due to the fact that you can install this doorbell anywhere outside where it may rain or experience any other type of weather over time, throughout the entire year. It can actually harm the doorbell if it isn’t waterproof, so your doorbell might eventually develop a problem.
What Will Happen If The Ring Doorbell Gets Wet?
There might be some bugs that are obvious to you depending on the specific type of product you have.
The sharpness of the camera degrades as moisture collects inside the lens or between the lens layers, which is the most frequent functional problem with these devices.
The device could malfunction, electrocuting anyone who comes into contact with it if the wire is the component that is impacted by humidity and condensation.
In order to fix your device and ensure everyone’s safety, you must call Ring customer service right away if this happens.
Protect Ring Doorbell From Different Elements
Extreme weather conditions like hail, rain, intense heat, and sunlight are not a problem for the Ring doorbell.
Lens glare is the primary issue brought on by sunlight. Poor video quality is brought on when direct sunlight shines through your doorbell camera lens.
If your system is overexposed, it may also overheat or even activate the PIR sensor, which detects motion based on heat and might cause false alarms.
Utilizing a wedge or sun shield is the best solution for this. This can be positioned so that your doorbell is angled to shield it from direct sunlight, which would degrade the quality of the image.
Your doorbell can also benefit from sun protection by using sun shields. It is advised to use the sun shield that is mounted around your doorbell rather than the overhead model, which can overheat.
Water won’t damage the Ring doorbell. however, this only applies for a short time frame.
The doorbell is damaged when powerful water jets strike it, which typically happens during periods of heavy rain.
As was mentioned in the previous scenario, using a shield that physically shields the device is one way to keep it dry.
To stop water from getting inside the doorbell and harming the circuitry, you can also use a waterproof covering.
The latter choice is more practical and less expensive.
Extreme Cold Or Heat
The Ring doorbell can function while being powered by a battery between -5 and 120 degrees Fahrenheit.
By wiring it directly into an electrical circuit, it can withstand temperatures as low as -22 degrees Fahrenheit.
The motion detection feature can malfunction and the battery can drain more quickly in extremely cold temperatures.
By regularly checking the battery and making sure it is at 100% before remounting the device, you can avoid this.
How To Reduce The Risk Of Ring Doorbells Getting Wet?
It’s crucial to understand how to lessen the chance that moisture will cause damage to your doorbell. If your doorbell doesn’t have an IP54 rating or higher, there are three common problems that will ruin your doorbell:
- battery compartment leaks;
- Short circuit due to water in the electricity;
- Use outdoors in cold climates risks freeze damage.
- Ways to reduce the risk of moisture and damage to your doorbell
Here are some suggestions for lowering the possibility of getting damp and sustaining damage when someone rings your doorbell.
- Keep the doorbell from getting wet, and stay out of the rain and snow.
- To prevent water buildup, cover the base of your Ring Floodlight Camera if you have one.
- Switch off the Live View function on the mobile app and off the floodlight camera when it is raining outside.
- If there is a storm, it is not recommended to remove or reinstall the doorbell
- Make sure the device is dry after dripping before using it again to avoid encountering one of the three issues we mentioned earlier. Make sure to fully dry it.
- When taking the doorbell out, take care to thoroughly dry it off so that water doesn’t get trapped in the screw holes or other parts of the housing, which could lead to damage.
- Replace the doorbell if there are any indications of corrosion or rust.
- The doorbell can also be dried quickly using a hair dryer; after that, it can be wiped with a cotton swab before being used once more.
- There is always the option of wrapping insulation around or on top of your device to protect it from all weather conditions, such as insulating tape, heat shrink tubing, or outdoor silicone.
Keeping your doorbell indoors at all times is another way people defend their doorbell. If there is a chance of water damage, you might not want to use this since it must be constantly plugged in. But aside from that, it ought to keep your ring safe from any outside occurrences while still allowing you easy access from a mobile device!
Different Covers For The Ring Doorbell
Popmas Weather-blocking Doorbell Visor
Your doorbell is held in place and shielded from the elements by the Popmas Weather-Blocking Doorbell Visor, a weather-blocking anti-glare wall mount.
It eliminates the glare caused by the sun at noon and artificial lights at night.
It has an anti-glare adapter that shields the doorbell camera from UV rays from the sun, lessens glare, and ensures good video quality both during the day and at night.
High-quality acrylic used in its construction ensures protection from any rain-related damage.
The top mount shields the camera from rain splashes while steadily holding it in place.
During ferocious winds and adverse weather, it can also steadily focus the camera.
The Pompas weather-blocking doorbell visor is easy to install.
The usual nuts can be used to mount it on a brick or wood wall. Because of its edge-to-edge dimensions, it can be installed on small surfaces.
The mount can only be positioned from three different angles, which is a drawback.
Additionally, the anti-glare adapter cannot be adjusted. But aside from that, the Pompas doorbell visor is excellent for shielding your camera from inclement weather.
Yiphates Plastic Doorbell Rain Cover
One of the most simple options for safeguarding your doorbell is the Yiphates Plastic Doorbell Rain Cover.
It serves as a physical shield around the camera to protect it from the elements, including snow accumulation and raindrop impacts.
It is simple and easy to install the cover. It is only 10 cm deep, and any super glue, such as AB glue, can be used to install it.
However, since it is not included in the package, you will need to purchase it separately.
It can easily fit on any door and is big enough to cover all angles. It is one of the simplest and most straightforward ways to safeguard the doorbell camera and can be carried out without the need for assistance or special knowledge.
Sonew Plastic Rain Cover For Door Access Control
Similar to the Yiphates Rain Cover, the Sonew Plastic Rain Cover encloses the doorbell and camera and shields it from all types of weather.
Direct sunlight and UV rays are deflected away from the camera.
It is made of PVC, a material that is incredibly strong and can ensure a long life.
In the event of a fall, the rubber coating serves as a shock absorber and guards against damage to your Ring doorbell.
The design is made to blend in and camouflage with the interior decor. It is therefore hard to detect from a distance.
Super glue, which you can apply to the flat side of the cover and firmly press to the wall, is all that is required for the installation, which is also incredibly straightforward.
The drying process only takes 30 minutes. It can also be used with cameras that have keypads or fingerprint protection enabled.
Wasserstein Colorful & Protective Silicone Skins
Your camera doorbell can be protected by this. The comfort and safety of using it are well thought out.
The shield can provide protection from the sun, brisk winds, rain, snow, and dust because it is weatherproof.
Due to the silicone used in its construction, it won’t melt in extremely hot weather or freeze in extremely cold weather.
It is incredibly resilient. The speakers, motion sensors, microphone, camera, and other components are all clearly visible.
The installation process is simple. Due to the glue on the bottom cover, it adheres to the wall firmly.
Simply press it up against the wall and wait for the glue to dry for about 30 minutes.
Additionally very user-friendly, and the setup works well with keypads or cameras with fingerprint security.
Mefford Ring Doorbell Silicone Cover
The Mefford Ring Doorbell Silicone Cover is a premium, long-lasting silicone cover that offers an incredibly strong defense against heat and moisture.
In addition to withstanding inclement weather like heat, rain, or snow, it can block the sun’s UV rays.
Since it blends in well with your doorbell camera and has a sleek design, it is difficult to spot from a distance.
Since the casing is light, the doorbell’s weight is not increased.
It completely encloses the doorbell by preventing even tiny gaps and ensures that no water seeps through the holes.
Only first-generation Ring doorbells are compatible with it, and it can only be mounted flat, which is one of its few drawbacks.
So, the Ring Doorbell isn’t waterproof. But they are resistant to weather and water and can withstand even the most hostile environments.
There are many doorbell covers available, some of which are reasonably priced and functional if you already have a doorbell and want to shield it from rain, snow, or direct sunlight.
Read More: How To Lock A Door Without A Lock?